Elite Master: Plaster for Master Models Type IV - ZHERMACK (Dentsply Sirona Group)

Zhermack Elite Master Plaster

Extra hard resin-reinforced plaster type 4, for dies in fixed prosthetics and implantology. Thanks to their special formulation optimised for reading CAD/CAM systems, the models made in the colours desert sand, sandy brown and soft grey can be read by the main laser and optical scanners.

Advantages of Elite Master Plaster:

• Optimum chamfering without chipping due to the high elasticity of the resin particles contained in the plaster.
• The resin particles reduce water absorption and ensure the fidelity of the model.
• Absolute tolerance for the professional thanks to the absence of formaldehyde in the formulation.
• All elite master colours have been optimised for detection with modern laser and optical scanners.
• Low expansion even after 48 hours.

Features of Elite Master Plaster:

• Resin reinforced.
• High mechanical characteristics.
• Marbled and smooth appearance.
• True reproduction of the detail.
• Water/powder dosage: 21 ml-100 g
• Time to withdraw the model: 45 min.
• Expansion to 2 h: 0,08 %.
• Compressive strength at 48 h: 75 MPa (765 kg/cm2).
• Mixing time (manual): 1:00 min.
• Mixing time (under vacuum): 0:30 min.
• Working time: 12:00 min.
• Setting time (VICAT): 14:00 min.
• Time to remove the model from the print: 45:00 min.
• Contents: 3 kg bag in Sandy Brown tone.