Starlight PRO - Led lamp - MECTRON

Starlight Pro Wireless Light Curing Lamp

The Starlight Pro operates for 320 cycles of 10 seconds on a single charge, and fully recharges in just 90 minutes.

The power can be easily programmed thanks to the radiometer incorporated in the charger base, it allows to measure the wavelength of the light, thanks to its led indicator and acoustic signal it assures the effective control on the restoration and material to use, besides other indications like low battery or operating error.

Features of the Starlight Pro Lamp:

• Its output can be checked thanks to the built-in radiometer.
• Hardens a 2 mm thick layer in only 10 seconds.
• It offers the possibility to choose between two modes of operation: "fast curing" and "slow rise" (soft start).
• The unique metal connection ensures optimum light beam transmission.
• Lithium battery of high duration and without memory, constant power at the expense of the level of load.
• Charging time: 90 min.
• The new LED technology makes it possible to reduce the size of the lamp by only 105 grams.
• No overheating or fan noise compared to older systems.
• Available in different colours.

Technical Specifications of the Starlight Pro Lamp:

• Dimensions (length x Ø) 198 x 22.5 mm
• Weight 105 g
• Wavelength 440-480 nm
• Luminous intensity > 1,400 mW/cm2
• Average LED life (10 sec cycles) 2,500,000 10 sec cycles
• Battery charging time 90 min
• Accumulator capacity 160 cycles of 20 sec
• Warranty (excluding fibre optics) 3 years including battery.