Implant Internal connection surface HSLA-P+ (3.5mm Ø) - NORICUM IMPLANTS

Internal 3.5mm Fusio® Noricum connection implants

Implants with an internal conical hexagonal connection witha 3.5mm Ø platform, available in lengths from 8.5 to 15mm and hybrid surface treatment: sandblasting and chemical etching to promote osteintegration and therefore the final success of the treatment.

Simplified design allows easy placement in all types of treatments: immediate load implants, narrow jaws or soft bone

Noricum offers the greatest compatibility with an extensive catalogue of its own for all types of oral rehabilitation: Direct to implant, with mini-conical or unitary abutment

Characteristics of Fusio® Implants

• Geometry:
  • Parallel walls with a slight increase in diameter in the coronal area to improve primary stability.
  • Double spiral and thread pitch facilitate placement while the cutting slots at the apex act as a tap during insertion.
  • Vertical helical grooves arranged against the direction of tightening facilitate insertion into hard bone by means of slight recoil.
  • Optimized groove design to provide more torque during removal than during tightening, thus improving the initial stability of the implant.
• Surface:
  • Surface treatment to increase the process of osteintegration, by increasing the available surface with greater depth and uniform roughness, increases contact with the adjacent bone and the generation of a hydrophilic surface.
  • Hybrid surface of the latest HSLA-P+ research(Sand blasted, Large grit, Acid etched) on the 2/3 of the most apical parts of the threaded surface and subsequent Plasma+ treatment on its entire surface.
  • Plasma+, contributes to greater hydrophilicity and biocompatibility by improving the osseointegration of the SLA surfaces and also of the most coronal part of the implant.
  • Scanning Electronic Microscopy (Jeol JSM-6335 CF) where the surface is observed with homogeneous macro-rougheness and uniform distribution in depth between 1-2 μm of diameter over it:

• Macroscopic design:
  • The parallel walls are extremely easy to install, as their macroscopic design provides much greater initial stability than other brands. 
  • Suitable for use in cases of immediate loading, soft bones or extreme jaws.
  • The external hexagon incorporated in Noricum implants is one of the most extended connections on the market, making it ideal for screw-retained prostheses.
  • Theimplant neck has been designed to have a short distance from the crown margin to the first loop, resulting in an advantage for fine biotypes.

• Product information:

  • Manufacturer: NORICUM.
  • Different sizes available
    • Length 8.5mm, manufacturer's reference: IP3IE350085
    • Length 10mm, manufacturer's reference: IP3IE350100
    • Length 11.5mm, manufacturer's reference IP3IE350115
    • Length 13mm, manufacturer's reference: IP3IE350130
    • Length 15mm, manufacturer's reference: IP3IE350150

  The Noricum company

  • The current line of fusio® implants are Noricum's endo-osseous implants developed as a natural evolution of the Per-Ingvar Brånemark from the observation of the osseointegration of titanium in bone in the 1960s.
  • The criteria for this evolution have always been safety and efficiency in dental restoration as well as simplicity and ease of use for the dentist.
  • Noricum manufactures in Spain and is ISO-13485 certified for the manufacture of medical devices.
  • You can consult the complete catalogue of implants, contact us for more information:

Noricum Implants Catalogue