EndoExplorer: Carbide bur for FG (5 pcs) - KOMET

Komet EndoExplorer Pulp Access bur

Bur for opening of the pulp chamber and access to the root canals, of the latest generation. Equipped with a conical tip, it allows precise removal and selective on the bottom of the pulp cavity and discover the root orifices without sacrificing healthy tissue, approach minimally invasive.

Improves the long-term prognosis of endodontically treated teeth and facilitates their subsequent restoration .

Characteristics:

• Fine tip and conical
• Long neck and thin neck, specially designed for use with dental microscope
• Provides a direct view and clear of the access cavity.
• Structure of toothed cut and very sharpened with sharp active tip .
• Allows almost pressure less dentine removal
• Precise work y controlled
• Made of tungsten carbide
• Available for Contra-angle (low speed 2000rpm) and for Turbine (high speed 10000rpm).
• Content: 5 pieces.

Sequence of use of EndoExplorer:

The EndoExplorer burs are available in EX1 and EX2 with different tip conicity for each treatment:

• EX1: Indicated for exposure of isthmus between ducts
• EX2:
  • Initial preparation of the access cavity and exposure of inputs to the duct
  • Access cavity widening, facilitates subsequent instrumentation with NiTI files

Available Types:

• The EX1 bur has a length of active cut of 3.9mm, with a diameter of progressive conicity of ø0.75 to 0.28 mm with 3 lengths neck:
  • Short stem , with manufacturer's reference: EX1S.204.007
  • Short stem , with manufacturer's reference: EX1S.204.007
  • Short stem , with manufacturer's reference: EX1S.204.007
  • Long fault for TURBINE, use with high speed turbine (310), manufacturer's reference: EX1.310.007

• The EX2 bur has a length of active cut of 2.5mm, with a diameter of progressive conicity of ø1.1 to 0.32 mm with 3 lengths neck:
  • Short stem , with manufacturer's reference: EX2S.204.011
  • Short stem , with manufacturer's reference: EX2S.204.011
  • Short stem , with manufacturer's reference: EX2S.204.011
  • Long fault for TURBINE, use with high speed turbine (310), manufacturer's reference: EX2S.204.011