EndoExplorer: Carbide Burs for CA (5 pcs) - KOMET
Burs for primary and secondary slides of the access cavity:
- They are perfectly adapted to the requirements of the use of the microscope.
- Great vision during work thanks to the long, narrow neck + the small head of the instruments.
- Different models available
S = Diameter Size / G = Grain Size / L = PA Length
- Nº 1 in Explorers Burs
Burs for primary and secondary slides of the access cavity:
- They are perfectly adapted to the requirements of the use of the microscope.
- Great vision during work thanks to the long, narrow neck + the small head of the instruments.
- Different models available
S = Diameter Size / G = Grain Size / L = PA Length
111,34 € 89,07 €
111,34 € 89,07 €
111,34 € 89,07 €
111,34 € 89,07 €
111,34 € 89,07 €
111,34 € 89,07 €
Description
Komet EndoExplorer Pulp Access bur
Bur for opening of the pulp chamber and access to the root canals, of the latest generation. Equipped with a conical tip, it allows precise removal and selective on the bottom of the pulp cavity and discover the root orifices without sacrificing healthy tissue, approach minimally invasive.
Improves the long-term prognosis of endodontically treated teeth and facilitates their subsequent restoration .
Characteristics:
- Fine tip and conical
- Long neck and thin neck, specially designed for use with dental microscope
- Provides a direct view and clear of the access cavity.
- Structure of toothed cut and very sharpened with sharp active tip .
- Allows almost pressure less dentine removal
- Precise work y controlled
- Made of tungsten carbide
- Available for Contra-angle (low speed 2000rpm) and for Turbine (high speed 10000rpm).
Sequence of use of EndoExplorer:
The EndoExplorer burs are available in EX1 and EX2 with different tip conicity for each treatment:
- EX1: Indicated for exposure of isthmus between ducts
- EX2:
- Initial preparation of the access cavity and exposure of inputs to the duct
- Access cavity widening, facilitates subsequent instrumentation with NiTI files
Available Types:
- The EX1 bur has a length of active cut of 3.9mm, with a diameter of progressive conicity of ø0.75 to 0.28 mm with 3 lengths neck:
- Short stem , with manufacturer's reference: EX1S.204.007
- Short stem , with manufacturer's reference: EX1S.204.007
- Short stem , with manufacturer's reference: EX1S.204.007
- Long fault for TURBINE, use with high speed turbine (310), manufacturer's reference: EX1.310.007
- The EX2 bur has a length of active cut of 2.5mm, with a diameter of progressive conicity of ø1.1 to 0.32 mm with 3 lengths neck:
- Short stem , with manufacturer's reference: EX2S.204.011
- Short stem , with manufacturer's reference: EX2S.204.011
- Short stem , with manufacturer's reference: EX2S.204.011
- Long fault for TURBINE, use with high speed turbine (310), manufacturer's reference: EX2S.204.011
Product information:
- Manufacturer: Komet
- Contents: Box of 5 units
Questions and answers
There are no questions yet. Be the first to ask one!
You need to be logged in to ask questions. Login