Ground Micro-Tips for Magnetic Polishing Machines - ESTMON

0.35 x 5/7 mm ground micro pins for magnetic polishers

The micro tines are made of steel, which allows them to rotate at a higher speed inside the tank. They are ideally sized to reach most corners of the room with an unparalleled shine. Micro-blades are an indispensable element in the polishing process.

Characteristics of Ground MicroTips:

• As they are ground, they do not have a sharp edge.
• They do not mark the pieces at any time.
• They avoid the usual sandblasting effect.
• Facilitates and optimises the polishing process.
• Dimensions: 0.35 x 5/7 mm.
• Content: 1 gram.

How to use the ground micro tines:

When the micro tines darken and lose their initial shine, we recommend maintenance with PM (powdered compound for cleaning and degreasing micro tines) and D5M (special liquid for magnetic polishers).

• For intensive cleaning, add 20 g of PM compound per litre of water. Rotate for 20 minutes.
• For polishing the parts, add 40 ml of D5M compound per litre of water. Rotate for 20 minutes.