Post Drill: Fibreglass Pole Cutters - VIDU

VIDU 's post milling cutters are manufactured from stainless steel, designed to flex without breaking in the channel , reducing the risk of fracture.

Features of Vidu Post Drill Burrs:

• Made of stainless steel monobloc (reamer).
• Specific for enlarging the root canal with the same taper as the post.
• Colour coded with the corresponding post.
• Individually packaged in small containers with labels.
• Corrosion resistant, autoclavable and also resistant to salt spray at 140.
• Length 19 mm.
• They are available in 4 different sizes.
• Diameter: 1.0 mm.
• Content: 1 unit white colour.

Uses and recommendations for Vidu Post Drill Burs:

• For safe clinical use, the use of goggles, mask and gloves is recommended; it is recommended that the patient wears protective goggles and a rubber dam is used to prevent the patient from swallowing the material or residues.
• Completely remove the gutta-percha and sealant from the canal to the required depth. A seal of 3-4 mm should be left to ensure the success of the treatment. Try to remove as little dentine from the canal as possible.
• Before use, check the degree of wear of the cutter, preferably using a magnifying glass or some kind of magnification.
• Insert the cutters, preferably at a reduction ratio of 2:1 or 3:1 into the workpiece. Make sure that the cutter has been correctly inserted and lock the workpiece head.
• Use the drills at low speed inside the canals (1500-3000 rpm), with water, cooling spray (>25ml/min) and gentle up and down movements, allowing chips and dentine to come out.

VIDU FIBREGLASS POST MILLING CUTTERS - PLASTIC NEUTRAL CERTIFIED - ZERO PLASTIC FOOTPRINT

Fibreglass post burs are part of the specific hospital waste group IV, materials that cannot be recycled if not incinerated, for hygienic, sanitary and usage reasons it is difficult to find an alternative made of another material. VIDU works to always offer the most responsible solution and, while maintaining the necessary hygienic qualities in the clinic, always seeks a balance between fair price and care for the planet.

Environmental impact meters >> Plastic footprint of 1 packet of 0.5 gr VIDU burs= 0 gr.

• Weight of plastic used = 0.5 gr.
• Weight of plastic collected = 0.5 gr.
• Type of collection: Normal.
• Location: Mediterranean Sea.
• Data for each VIDU Fiberglass Post Milling Cutter.
• Certified by Gravity Wave.
• Learn more.

LET'S BE PART OF THE CHANGE!

• Plastic Neutral. Certified by Gravity Wave.
• 100% recyclable packaging. In the packaging of the burrs, recyclable materials have been used as a priority, always guaranteeing the highest quality and hygiene conditions for the products.
• Fair price. By achieving a fair and reasonable price, we always seek to offer the least polluting and most easily recyclable solution possible, guaranteeing the highest quality and hygiene conditions for the products.
• Online distribution. The marketing of these products is carried out via the internet, thus avoiding unnecessary transport and contamination.
• Production forthcoming. This product is manufactured and packaged in Europe, favouring local manufacturing and minimising transport.
• Responsible consumption. Do not use more burrs than necessary!

How to manage the waste generated in the clinic with the use of burs?

Burs are sterilisable and multi-purpose products. Unfortunately, at the end of their useful life, burs cannot be recycled, as they are a product subject to mandatory incineration and belong to group IV of sharps waste. VIDU is working on the development of alternatives and new recycling channels for clinical waste.

The packaging of the Post Drill cutters is made of recyclable (HDPE) plastic and it's that easy:

• How to recycle post burrs?
• How to easily recycle the packaging of this product?

1. When you have used all the burrs place the jar in the yellow bin or in the container where you usually store the "Plastic containers, cans and bricks" in the dental clinic.
2. Once you have accumulated enough, dispose of it in the nearest recycling bin.

Where do Vidu Post Drill Burs come from?

One of the brand's objectives is transparency, which is why the country of origin is always specified on the packaging of all products. It will vary from one product to another, always looking for the manufacturing conditions that ensure: Quality, sustainability and fair prices.

In the case of Post Drill cutters, they are manufactured in Italy.