Ecovac: Thermoforming Machine - Clarben

Ecovac Vacuum thermoforming machine

Thermoforming machine for the manufacture of splints and plates using heated plastic plates, the ideal solution for whitening treatments and customised trays for each individual case, greater accuracy, safety and predictable results and greater comfort for the patient.

Features of the Ecovac thermoforming machine:

• Vacuum thermoforming machine to effectively duplicate plaster models in a plastic impression of the same, using square thermoplastic plates.
• Includes abrasives for the use of the machine.
• High-performance system: The electric vacuum motor provides powerful and immediate suction.
• Comfortable and safe design.
• Simple handling.
• Robust construction: Only 6 kg in weight.
• New button that improves and extends the life of the engine.

Purpose of the converting machine:

• Individual trays.
• Mouthguards.
• Orthodontic retainers.
• Periodontal sleeves.
• Tailor-made fluorination trays.
• TMF covers.
• Bridges and temporary crowns.
• Individual trays.
• Space maintainers.
• Covers for cases of bruxism.

Instructions for use:

• Connect the equipment to a 220 V/50 Hz or 110 V/60 Hz socket. Compruebe el estado del motor de vacío y de la resistencia eléctrica de calentamiento. Tenga cuidado al manejar la máquina, la placa de calor alcanza temperaturas elevadas.
• Place the model in the centre of the machine.
• Put the steel balls in the bucket. El uso de ambas es obligatorio para evitar la rotura de la rejilla.
• Place the iron between the upper and lower frame.
• Turn the wheel to close the frames tightly and adjust the iron.
• Move the griddle closer to the heat source.
• Turn on the heating grid.
• After 2-3 minutes, when the bottom surface of the iron has dropped about 1 cm from the frames, turn off the heating element.
• Lower the iron as low as possible and switch on the suction motor.
• Only the part without the steel balls will be shaped. Retírelas y obtendrá su modelo.

Warnings: With this type of system, an exact plastic replica can be made from the plaster model. The result achieved depends on the accuracy of the model you are working with, and to this extent:

• That the model is free of bubbles.
• That the base of the model is not too wide, the larger the basal area of the model, the more suction holes it disables and the less suction is available to help the plastic fit.
• The non-inclusion of gingival tissue in the model when it is accurate in plastic reproduction.
• In any case, bearing these recommendations in mind, the impressions required for vacuum formers do not differ from those used in other techniques. It is recommended to use plaster as a mould material because of its porosity, as this provides suction of the plastic through the model.

Product information:

• Manufacturer: CLARBEN
• Manufacturer's Reference: 09-018 CL
• Content: Processing machine and shot blasting.