Endo Kit BFRT: Tips for Extraction of Broken Files - RUMAR

Endo Kit BFRT: Tips for Extraction of Broken Files

This kit is designed to facilitate canal enlargement and the extraction of broken files during endodontic procedures. Each of its tips has been carefully designed to ensure maximum efficiency and safety, making the most of its use during the different stages of the process.

Kit Features:

• Canal enlargement up to the broken file: Use a Gates Glidden drill No. 3 to enlarge the canal up to the broken file and brush it against the outer wall to widen the canal when the curvature of the canal is less than 15 degrees. If the curvature is greater than 15 degrees, use a NiTi conical file No. 60/.02 to perform this procedure.
• ED88 (Katana-H) and ED89 (Katana-V) tips: These tips create a semicircular space of 90 degrees. They are used to create a fine space between the inner wall and the broken file, activating the ultrasonics when placed in the space. It is recommended to apply medical-grade silicone oil if the curvature is greater than 30 degrees.
• ED87 (TFRK-S) tip: Used to enlarge the peripheral space from 90 to 180 degrees. Under magnification, the broken file will move from the original space to another. It is recommended to use tapping and pulsing movements, avoiding pressing against the canal.
• Extraction of the broken file: Once the canal is widened, the ED87 ultrasonic tip should be used to attempt extraction, placing the tip in the created space and activating the ultrasound vertically and briefly.

Contents of the kit:

• ED87 tip (TFRK-S)
• ED88 tip (Katana-H)
• ED89 tip (Katana-V)
• Key
• Holder for 6 tips