AUTOCLAVE CLASS B SK07 FROM FARO
The class B autoclaves, series SK07, versions 16 and 21 are the cutting edge in the field of sterilization. FARO's Research and Development department has carefully selected the new components and has chosen state-of-the-art electronics made using SMT technology. This technology allows to reduce the consumption of energy and water and requires a minimum maintenance. The design, sober and very modern, gives an especially attractive appearance, which is integrated in the consultation improving the aesthetic quality of the whole.
- It performs class B cycles (121 ° C - 134 ° C B-Flash - 134 ° C prion) and tests Bowie and Dick - Helix Test - Vacuum Test Fast cycle B Flash to drastically reduce the sterilization times of Small loads (up to 0,5 kg - version 16 and up to 0,7 kg - version 21).
- LED display and control panel with 4 buttons for easy programming.
- Control of the physical characteristics of the cycles.
- Comprehensive safety system to control all phases of the cycle and indicate possible irregularities possibility of direct connection to the water network.
- Quick coupling wrenches for loading and unloading water.
- Automatic tank loading: internal tank for automatic water loading using integrated pump and waste water discharge tank.
- High autonomy: 10-12 cycles (version 16) or 7-8 cycles (version 21), with a single charge of water distilled from the internal tank.
- Automatic water loading via integrated pump.
- Reduced water consumption: dosing system and water injection pump in camera managed by the software to avoid waste.
- Reduced energy consumption: copper chamber with better thermal conductivity (compared to steel).
- Resistance divided into 3 sectors and managed by the software, which avoids heating where it is not necessary, avoiding waste of energy.
- Automatic stand-by at low temperature. To reduce the preheating time without consuming energy.
- Simple and quick display control, without using keys, simply by pressing the button on the door and turning the viewfinder.
- Maximum temperature uniformity: homogeneous temperature and pressure throughout the sterilization chamber.
- "Last cycle" system - last automatic advanced cycle, for perfect drying.
- The delayed start function allows you to program the start of the cycle at any time to program a warning on the display indicating the end of the cycle.
- Supply voltage: 230V - 50/60 Hz / 240V - 50 Hz.
- Maximum current consumption: 9.8 A.
- Maximum power consumption: 2270 W.
- Average consumption per cycle: 1300W.
- Volume of cargo tank: 3.65 liters.
- Cycle time with full load tank: 7 - 8
- Minimum dimensions of recess: 790 x 450 x 489 mm.
- Tray size: 382 x 184 mm.
- Cycle 134 ° C - Standard From 31 'to 37'.
- Cycle 134 ° C - Prion From 45 'to 47'.
- Cycle 121 ° C - Standard From 46 'to 48'.
- Cycle 134 ° C - B FLASH From 23 'to 25'.
- Manufacturer: FARO
- Support trays.
- 3 trays.
- Autoclave with integrated printer and connection to water supply. Reference: 80-74500
- Autoclave with SD card, software for memory card and connection to water supply. Reference: 80-745100
- Autoclave prepared for external printer (Ref .: 80-742200) and connection to water supply. Reference: 80-745200