Sanosil S003: surface sanitizer - Sanosil

Sanosil S003: surface sanitizer

Sanosil S003 is a broad spectrum sanitizing spray, effective against bacteria, viruses, fungi and yeasts. It is ecofriendly and long-lasting for disinfection.

It is a product that has hydrogen peroxide as an active principle to provide greater sanitation of surfaces and instruments. It is very effective in field disinfection in the dental, health, veterinary, cosmetic, laboratory and pharmaceutical sectors.

* Exclusively for application by specialized personnel .

Features of Sanosil S003:

• Odorless and colorless .
• Effective against bacteria, viruses, fungi and yeasts, molds, protozoa and spores.
• Bactericidal and Levuricidal In compliance with the UNE-EN 12776 EN and UNE-EN 1650 standards.
• It does not generate toxic waste.
• For disinfection of surfaces and instruments in daily activity .
• Ready to use, do not dilute with water.
• Easy to use, it can be sprayed or nebulized on the area to be treated, or the instruments submerged in the product.
• Agents: 1.5% H2O2.
• 0.0015% Ag.
• Sanitization of surfaces contaminated with organic matter thanks to the composition of its active ingredients.
• Ideal for continuous use .
• Suitable for textile use.
• No allergens . It does not irritate the skin, it does not stain.
• Biodegradable .
• Does not contain chlorines, bromines, iodines, aldehydes, phenols, alcohols and quaternary ammoniums, etc.
• Non-corrosive.
• Applicable to almost all types of materials.
• It does not require special regulations regarding transport and storage.
• It continues to act up to 18 hours after application.
• Content : 4 bottles of 1 Liter.

Using Sanosil S003:

Disinfection by spraying:

• Apply Sanosil S003 with spray equipment in the area to be disinfected.
• Approximate dose : 5 ml / m2.
• Exposure time : 5 - 20 minutes.
• Let dry.
• Recommended security period: 3 hours.

Disinfection by nebulization:

• Apply Sanosil S003 with nebulizer equipment in the area to be disinfected.
• Approximate dose : 5 - 10 ml / m3.
• Exposure time : 60 - 120 minutes (depending on microbial load).
• Let dry.
• Recommended security period: 3 hours.

* Use biocides safely, always read the label and information about the biocide before use .